HHV Extrusion Mill – Aerospace extrusion
The Modig HHV Extrusion Mill has been designed as a universal machining center for aerospace extrusion components. It has the capability of bar stock machining both Aluminium and Composite components in one single operation or setting.
-
Politica de securitate (editeaza cu modulul Reasigurare pentru clienti)
-
Politica de livrare (editeaza cu modulul Reasigurare pentru clienti)
-
Politica de returnare (editeaza cu modulul Reasigurare pentru clienti)
HHV Extrusion Mill – Aerospace extrusion
The Modig HHV Extrusion Mill has been designed as a universal machining center for aerospace extrusion components. It has the capability of bar stock machining both Aluminium and Composite components in one single operation or setting.
The HHV Extrusion Mill was developed in close cooperation with the world’s largest aircraft manufacturer and from its introduction in 2010, it quickly rose to become the first choice of leading aircraft producers.
Tests have also been made on bar stock materials by our profiling machine revealed reduced machining time per part of approximately 30% compared with standard three and four axis machining. At one of the world’s leading airplane builders, we measured a reduced processing time of 50%.
Unique depth of konwledge
Modig has been building profiling machines since 1988. Over the years, more than 30,000 drawings of machines and components have been analyzed and evaluated. This means that Modig has acquired a depth of knowledge and experience that is unique in the world. This is the knowledge that has been our source of guidance for the development of the HHV.
Strengths of the machine:
- All extrusions within 6×10” cross section
- Seat tracks
- Floor beams
- Stringer clips/brackets
- Fuselage stringers
- Stowage bin structures
- Fuselage floor grid components
Cod produs: HHV Extrusion Mill
Data sheet
- Tool Change Time
- 5 sec. (chip to chip)
- Spindle Type / Speed
- HSK-E63 DIN-69893
- Max RPM
- 30,000
- X/Y/Z
- 1500 mm (59.06″) / 420 mm (16.54″) / 260 mm (10.24″)
- U1/U2 Axis
- 900 mm (35.43″)
- Feed rates
- 0 – 60 rpm
- Bore diameter
- 250 mm / 10″
- Max. Extrusion Size (workpiece)
- 150 mm x 250 mm (6″ x 10″)
- Number of tools standard
- 24
- X/Y/Z/U
- 0 – 2,400 inch/min (0 – 60 m/min)
- A1/A2/A3
- 60 rpm/min
- Floor space
- 40′ (12,0 m) x 15′ (4,0 m)
- Weight, short bed, w/ (2) chucks
- 7,000 kg (15,430 lbs.)
The Modig HHV Extrusion Mill has been designed as a universal machining center for aerospace extrusion components. It has the capability of bar stock machining both Aluminium and Composite components in one single operation or setting.